[Logo] - Panasonic PT-LW373 Operating Instructions (Functional Manual)

Resetting the keystone correction
(Only for PT-LW373, PT-LW333, PT-LB423, PT-LB383 and PT-LB353)
To return to the factory default state by releasing the state of the keystone correction.
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [Reset value].
4) Press the <ENTER> button.
f The state of the keystone correction is released.

[Logo]

This function allows you to set the Logo select, the image capturing and the Logo PIN code.
1) Press as to select [Logo].
2) Press the <ENTER> button.
f The [Logo] screen is displayed.
3) Press as to switch the item.
f The items will switch each time you press the button.
[Logo select]
[Capture]
[Logo PIN code
lock]
[Logo PIN code
change]
[Logo select]
Set the logo display when the projector start-up.
1) Press as to select [Logo].
2) Press the <ENTER> button.
f The [Logo] screen is displayed.
3) Press as to select [Logo select].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[Off]
[Default]
[User]
*1
*1 [User] will be unavailable when the captured image is not registered.
[Capture]
Set the user logo display when the projector start-up.
1) Press as to select [Logo].
2) Press the <ENTER> button.
f The [Logo] screen is displayed.
3) Press as to select [Capture].
4) Press the <ENTER> button.
5) A confirmation screen is displayed, press as to select [Yes] and then press the <ENTER> button.
Chapter 4 Settings - [Expand] menu
Set the logo display when the projector start-up.
The projected image is captured as a still image. The captured image will be displayed as the
startup logo when [Logo select] is set to [User].
Set and change the Logo PIN code, and prevents an unauthorized person from changing the PIN
code.
Change the [Logo PIN code].
Displays only the countdown to project when the projector start-up.
Displays the Panasonic logo and the countdown when the projector start-up.
Displays the image registered by the user with the capture function.
ENGLISH - 67