Exterior Features - Toshiba USB001Z Instruction Manual

1. Exterior features

(1) Here are the names and functions of the exterior components of the USB001Z unit.
(1) RS485 (2-wire type) communication port
Used to connect to the RS485 (2-wire
type) port on the inverter
Applicable model: VF-AS1 and so on
(2) Common serial communication port
Used to connect to the common serial
port on the inverter
Applicable model: VF-S11, VF-nC1
(2) Interconnect cables (No cables are included with this converter unit.)
- Inverter side (Point of connection: Either (1) or (2) in the above figure)
Use one of the optionally available Toshiba-specified cables listed below.
Inverter-to-unit interconnect cable
- USB device side (Point of connection: (3) in the above figure)
Use a commercially available USB cable.
(Compliant with USB 1.1/2.0, A-B connection type)
Recommended cable length: 1 m or less
VF-S9, VF-A7
VF-P7, other models
CAB0011
CAB0013
CAB0015
- 4 -
RS485(2wire type)
LOGIC
Option Unit
USB
(3) USB communication port
Used to connect to a USB port on the
PC
Cable length
1.2m
3.6m
4.8m
E6581299
USB