Windows 98 Se - Toshiba USB001Z Instruction Manual

2.2. Windows 98 SE

(1) Turn on your computer and start Windows.
(2) Connect the USB001Z unit to the computer with a USB cable.
* At this time, do not connect the USB001Z unit to the inverter.
After a while, the "@Add New Hardware Wizard" appears on the screen of your computer monitor,
as shown in the figure below. Then, click [Next].
(3) Specify a way to search for the driver.
Click the checkbox for "@Search for the best driver for your device (Recommended)" in the window,
make sure a check mark is put in the checkbox, and then click [Next].
- 9 -
E6581299