Philips SE5761B/FR User Manual page 39

Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Select [MENU] > [ANSWER MACHINE]
> [SETTINGS] > [REMOTE ACCESS] ,
then press [SELECT] to confirm.
2
Select a new setting, then press
[SELECT] to confirm.
The setting is saved.
»
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter # when you hear the
announcement.
3
Enter your PIN code.
You now have access to your
»
answering machine, and you can now
listen to the new messages.
Note
•
You have 2 chances to enter the correct PIN
code before your phone hangs up.
4
Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat the current or listen to
the previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine
on.
(not available when you listen to
the messages).
8 Stop listening to the message.
9 Switch the answering machine
off.
(not available when you listen to
the messages).
Behavior of the LED display on the
base station
The table below shows you the current status
with different LED display behavior on the
base station.
LED Answering Message status
display machine
status
No Off --
display
On No message
On Steady on: message full
with 3 new messages
On Flashing: memory full
On Scrolling when recording
the incoming message or
announcement.
On Displays the volume
level.
On Flashing: remote access/
listen to messages from
the handset
EN
39