Advertisement
[11] MAINTENANCE
1. Maintenance table
Section
Developing
Developer
DV blade
DV side seal (F/R)
Process peripheral
Drum
2. Maintenance display system
Toner
Life
Remaining quantity
LED
Machine
Developer
Life
LED
Machine
Maintenance
LED
Machine
3. Remaining toner indication
TONER FULL
100%
100-90%
89-75%
• The remaining toner indication is based on the number of revolutions of the toner motor.
• The toner END indication appears when the END is detected by the toner sensor.
: Check (Clean, adjust, or replace when required.)
Parts
25K
NEAR EMPTY
About 10%
ON
Operation allowed
ON at 25K of the developer count.
Selection is available between Not Stop and Stop by Service Simulation (SIM 26-37) Setup.
(If Stop is selected, the LED will flash and stop at 25K.)
Default: Not Stop
∗
∗
Clear: SIM 24-06
Selection is available among 25K, 13K, 9K, 6K, 3K, and free (no lighting) with SIM 21-1.
∗
Default: 25K
∗
Clear: SIM 20-1
Not stop.
Remaining toner indication
75%
50%
74-50%
49-25%
AR-M150/M155/M155X MAINTENANCE 11 - 1
: Clean
50K
75K
100K
8K
EMPTY
Flash
Stop
25K
Display for users
25%
24-10%
10%
TONER CARTRIDGE
IS NEAR EMPTY
Displayed on the LCD.
✩
: Replace
: Adjust
125K
Remark
Lo
LOW LEVEL
10 sheets
REPLACE THE
TONER CARTRIDGE
Displayed on the LCD.
: Lubricate
Advertisement
