Ready To Watch Some Tv; If You've Connected Antenna To The Tv - Sceptre U50 Manual

Ready to Watch Some TV?

Starting up the UHD TV
1. Make sure your power cable is connected and the standby red light in the
front of the TV is lit up.
2. Check all your connection cables off the side or the back of your TV and also
your AV devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4.
Select the correct source according to the Connecting pages.

If You've Connected Antenna to the TV...

If an antenna or cable (without a cable box) is connected to your TV's tuner, you will
need to go through an INITIAL SETUP process in order to watch the TV.
1.
Press MENU to open the menu
Use the ◄ or ► button to select the CHANNEL icon and press ENTER.
2.
Use the ▲ or ▼ buttons to highlight the signal type and press ◄ or ► to
3.
select your connection either AIR or CABLE.
Use the ▲ or ▼ buttons to select AUTO CHANNEL SEARCH and press
4.
ENTER to scan for channels.
5.
Once the scanning finishes, you can begin to watch TV.
- 25 -
www.SCEPTRE.com
SCEPTRE U50 UHD TV User Manual