Table of Contents
Advertisement
Notes:
Allow at least 24 hours
before storing your wines
and to allow the temperature
to acclimate.
Radio devices may interfere
with the touch sensitive
controls and cause the
temperature settings to
change. Move radio devices
away from the wine cooler.
5
OPERATION
Installation Check List before Operation
1. Have all packing materials and tape been removed from the
interior and exterior of the wine cooler?
2. Have the installation instructions been followed, including
connecting the machine to electricity? And has proper grounding
been installed for the wine cooler?
3. Has the machine been leveled?
4. Is the wine cooler in a site where the ambient temperature is
around 77º F all year round?
5. Is there a clearance of at least 10" at the rear, 5" at the top and
5" at the sides for proper air circulation?
Adjusting the Temperature
Front panel controls
LCD Display
This wine cooler features a touch sensitive control panel. You may
adjust the temperature of the wine cooler using the front panel
controls. The temperature displayed will be in Fahrenheit. The wine
cooler has a temperature range from 46°F to 65°F. Whether your
wine cooler can reach the actual set temperature depends on the
ambient environmental conditions.
Adjusting the top zone temperature:
Press the Up
and Down
panel to raise and lower the temperature, respectively. The set
temperature will flash for a few seconds, and then revert to the
ambient inner temperature of the wine cooler.
Press the Light
button to turn on and off the inner light.
UP
DOWN
Temperature Adjustment Buttons
buttons in the middle of the control
Light Button
Advertisement
Table of Contents
