Presser Foot Pressure; Thread Breakage; Unpicking Seams - JUKI MO-114DN Instruction Manual

2-needle, 2/3/4-thread overlock sewing machine
Table of Contents

Advertisement

Adjustments and settings
Settings and practical sewing

Presser foot pressure

The presser foot pressure is factory adjusted to a medium setting.
Should you wish to adjust it, simply turn the knob in the direction de-
sired:
Position of knob for normal pressure (A)
More pressure: for thick or stiff fabrics such as denim, tweed, firm linen
(B)
Less pressure: for lightweight or sheer fabrics and knits (C).
Thread breakage during sewing
Sew off immediately at an angle and remove the work. Re-thread. If the
lower looper thread has broken, cut off both needle threads at the nee-
dles and remove the thread. First thread the looper then the needles.
Start sewing again about 2-3 cm in front of where the thread broke.

Unpicking seams

Using sharp scissors, cut the loops (C). Pull the needle thread (D) and
the stitches will come undone.
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mo-104dn

Table of Contents