Kohler K-1114-F Roughing-In Manual page 2

21"
(53.3 cm)
3-3/4"
(9.5 cm)
11-1/16" (28.1 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Drop-in rim style
Drop-in, 4-side integral
flange
Drop-in cut-out dimensions:
70-1/2" (179.1 cm) x 40-1/2" (102.9 cm)
Fixture*: basin area
Bathing well 55" (139.7 cm) x
23-1/4" (59.1
cm)
water depth
To overflow 15" (38.1 cm)
* Approximate measurements for comparison only.
Pump: Hp
1-speed 1.25
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
1047185-1-B
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1114 shown
K-1114-F not shown
top area weight
64" (162.6 cm) x 132 lbs
32" (81.3 cm) (60 kg)
capacity
78.5 gal (297 L)
V Hz A
120 60 7.5
required
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
1-1/4"
(3.2 cm)
Tile Flange
Pump/Control Access
1-1/2"
(3.8 cm)
19-1/2"
(49.5 cm)
1-1/2" OD
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 80
lbs./square foot (390 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim
Detail Detail
42" (106.7 cm)
Kohler Co.