What's in the box
Receiver
Transmitter
Power adapter x 1
USB cable for the power supply
of the transmitter x 1
HDMI cable
Adhesive tape x 2
Screws x 2
Note
Make sure you have all these items in the box. Contact your dealer for
•
any missing or damaged items.
sww1890_QSG_27_en.indd
2-4
1
Install
Connect the transmitter to your
computer
1
Connect the transmitter to the HDMI
User manual
port of the computer.
2
Connect the small end of the USB cable
Quick Installation Guide
to the POWER jack of the transmitter;
3
Connect the other end of the USB cable
to your the USB port of your computer.
» The power LED indicator of the
Quick Start Guide
transmitter flashes in blue, then turns
into solid blue when the connection is
established.
Note
•
For some computers, the HDMI and USB
ports are located in different sides of the
computer. It is not recommended to use the
Anchors x 2
USB port that sits right next to the HDMI
port. There may not be enough space for
both connectors.
Connect the receiver to the HDTV set
1
Connect the transmitter to the HDMI
port of the computer:
•
Connect one end of the HDMI cable
to HDMI OUT connector of the
receiver.
•
Connect the other end of the HDMI
cable to the HDMI in connector of
your HDTV.
2
Connect the supplied power adapter to
the receiver:
•
Connect one end of the power
adapter to the DC IN connector of
the receiver.
•
Connect the other end of the power
adapter to a power socket.
2
Enjoy
Turn on the power of your HDTV
1
Go to the source menu under the settings
menu of your HDTV.
2
Select the HDMI input to which the
receiver is connected.
Activate the wireless link
Switch on the transmitter and receiver.
a
When there is power supply for the transmitter
b
c
and receiver, they are on automatically.
» The link between the transmitter and
receiver is established (within 15-20
seconds).
Mount your receiver
You can either mount the receiver on the wall
or on the back of the HDTV.
Mount your receiver on the wall
1
Select a spot near the HDTV.
2
Drill two holes in the wall. Make sure that
the distance between the two holes is
1
25
/
" (45mm) and the diameter of the
32
hole is
/
" (5mm).
3
16
3
HDMI
Punch the supplied two anchors into the
two holes on the wall.
4
Put the two screws into the anchors and
leave
/
" (3mm) to mount the receiver on.
1
8
5
HDMI
Hook the key holes at the back of the
receiver on the screws.
HDMI
HDMI
24/11/2011
17:52:31