Table of Contents
Advertisement
Storage Interface Š
Chipset:
-
1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe
3.0 x4/x2 SSD support)
-
4 x SATA 6Gb/s connectors
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA
USB
Chipset:
Š
-
4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
-
6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Internal
1 x 24-pin ATX main power connector
Š
Connectors
1 x 8-pin ATX 12V power connector
Š
4 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
1 x system fan header
Š
1 x RGB LED strip header
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x USB 3.2 Gen 1 header
Š
1 x USB 2.0/1.1 header
Š
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
Š
2.0 module only)
1 x serial port header
Š
1 x Clear CMOS jumper
Š
Back Panel
1 x PS/2 keyboard port
Š
Connectors
1 x PS/2 mouse port
Š
1 x D-Sub port
Š
2 x USB 3.2 Gen 1 ports
Š
4 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
3 x audio jacks
Š
I/O Controller
iTE
I/O Controller Chip
®
Š
Hardware
Voltage detection
Š
Monitor
Temperature detection
Š
Fan speed detection
Š
Overheating warning
Š
Fan fail warning
Š
Fan speed control
Š
* Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
1 x 256 Mbit flash
Š
Use of licensed AMI UEFI BIOS
Š
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Š
connectors.
- 7 -
Advertisement
Table of Contents
