Table of Contents
Advertisement
Chapter 02
Preparations
Installation
Attaching the Stand
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
― The exterior may differ depending on the product.
1
Put the stand base onto the stand neck
as the direction shown in the figure.
4
Stand assembly is complete.
2
Check that the stand neck is firmly
connected.
3
Place a soft cloth over the table to protect the product and place the product onto
the cloth so that the front of the product is facing downwards. Push the assembled
stand into the main body in the direction of the arrow as shown in the figure.
Check that the stand neck is firmly connected.
9
Advertisement
Table of Contents
