Table of Contents
Advertisement
DSL-G2452GR
Configuring Network Printer
1.
Make sure that a driver for your printer which will be used as a network
printer is installed on your PC.
2.
To connect the printer to the router, power off both devices. Connect the
printer to the USB port of the router, power on the printer, then power on
the router.
3.
Then access the web-based interface and go to the Print Server page.
Move the Enable print server switch to the right, from the Printer
4.
drop-down list, select the printer connected to the USB port of the router,
and click the APPLY button.
Click the Start button and go to the Control Panel window.
5.
Select the Hardware and Sound section. (If the Control Panel has the
6.
category view (the Category value is selected from the View by drop-
down list in the top right corner of the window), choose the View
devices and printers line.)
5 Some home printers can work incorrectly as network printers. Contact the technical
support of your printer's manufacturer to clarify if your printer supports this function.
5
Quick Installation Guide
51
Advertisement
Table of Contents
