Table of Contents
Advertisement
DSL-G2452GR
Configuring Ethernet WAN Connection
This configuration step is available for the Ethernet (WAN), Ethernet
(LAN) connection methods, and the WISP Repeater mode.
You should configure your WAN connection in accordance with data
!
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.
1. On the Internet connection type page, click the SCAN button
(available for the Ethernet (WAN) connection method only) to
automatically specify the connection type used by your ISP or manually
select the needed value from the Connection type list.
Static IPv4: Fill in the following fields: IP address, Subnet mask,
Gateway IP address, and DNS IP address.
Static IPv6: Fill in the following fields: IP address, Prefix, Gateway IP
address, and DNS IP address.
Quick Installation Guide
32
Advertisement
Table of Contents
