LG CineBeam PH510P-NA Owner's Manual page 95

TIME Settings
1
Press the SETTINGS button.
2
Use the ,
button.
3
Use the ,
the OK button.
– To return to the previous menu, press the
4
Press the EXIT button when completed.
The available time settings are described as follows.
Item
Clock
Off Time/On
Time
, or button to select TIME and press the OK
, or button to set up the desired item and press
Checks or changes the time while watching projector.
Auto Synchronizes the projector clock to the
digital time information sent by the TV
station.
Manual Sets the time and date manually if the auto
setup does not correspond to the current
time.
Sets the time to turn on or off the projector
automatically. To use this feature, you should set the
current time and date in advance.
To use this feature, set the time correctly.
If you do not want to set Off Time/On Time, select Off
in Repeat.
NOTE
• If you set both Off Time and On Time features to
the same time, the Off time feature overrides the
On time feature.
• If you do not press any button within two hours
after the projector is turned on by the On Time
feature, the projector enters standby mode
automatically.
button.
Description
Mode
95