Bd-Live On Blu-Ray; Set Up A Network; Use Philips Easylink - Philips BDP2110/12 User Manual

BD-Live on Blu-ray

Access exclusive online services, such as movie
trailers, games, ringtones and other bonus
contents.
This feature is only applicable to Blu-ray discs
that are BD-Live enabled.
1
Prepare the Internet connection and set
up a network (see "Set up a network").
2
Connect a USB storage device to the
(USB) connector on this player.
• A USB storage device is used to store
the downloaded BD-Live content.
• To delete the BD-Live previously
downloaded on the USB storage
device for memory release, press
and select [Setup] > [Advanced] >
[Clear memory].
3
Play a disc that is BD-Live enabled.
4
On the disc menu, select the BD-Live icon,
and press OK.
» BD-Live starts to load. The loading
time depends on the disc and the
Internet connection.
5
On the BD-Live interface, select an item
to access.
Note
•
BD-Live services vary from discs and countries.
•
When you use BD-Live, data on the disc and this player
are accessed by the content provider
•
Use a USB storage device with at least 1GB of free
space to store the download.

Set up a network

Connect this player to the Internet to access
the following service:
BD-Live: access online bonus features
•
(applicable to Blu-ray discs that are BD-
Live enabled).
6 EN
1
Connect this player to the Internet through
wired (Ethernet) connection.
• Connect a network cable (not
supplied) to the LAN port on the back
panel of this player.
2
Perform the network installation.
1) Press .
2) Select [Setup], and press OK.
3) Select [Network] > [Network
installation], and press OK.
4) Follow the instructions on the TV screen to
complete the installation.
Caution
•
Before you connect to a network, familiarize yourself
with the network router and networking principles. If
necessary, read documentation accompanying network
components. Philips is not responsible for lost, damaged,
or corrupt data.

Use Philips EasyLink

This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.