Cobra microTALK PR100 Owner's Manual page 7

Operation
Listening
Adjusting Volume
Volume Level
Call Button
Roger Beep Icon
English
7
Using Your Radio
3. When your desired privacy code is displayed:
a. Press the
setting and proceed to "Roger Beep" selection.
b. Do not press any buttons for 15 seconds to enter
the new setting and return to
The Mode/Lock button has dual
functions. Press and release to
enter Mode Function. Press and
hold to enter Lock Function.
Listening for a Response
When You are Finished Talking:
1. Release the Talk
transmissions. Your microTALK
always in Standby Mode while the
Call buttons
Volume
To Adjust the Volume:
1. Press the Volume Up
Down button.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Call Button
To Alert Another Person That You Are Calling:
1. Press and release the
The other person will hear a two (2) second ringing
tone. You cannot send or receive transmissions
during the two (2) second call tone.
"Roger Beep"
Your listener will hear an audible tone when you
release the Talk
that you are finished talking and it is
to speak. This feature can be turned On or Off.
To Turn "Roger Beep" On or Off:
When turning On your microTALK
the first time, "Roger Beep" will be On.
Mode/Lock button to enter the new
button to receive incoming
are not pressed.
or Volume
Call button.
Confirmation Tone
button. This alerts the other party
Standby Mode
® radio is
Talk or
OK for them
® radio for
.
•
•
•
•