Using Your Radio - Cobra microTALK PR100 Owner's Manual

Operation
On/Off Power
Battery Low
Talk Button
2 inches (5 cm)
From Mouth
Mode Button
English
5

Using Your Radio

Turning On Your microTALK
To Turn On Your Radio:
1. Press and hold the
hear a series of audible tones indicating the
radio is On.
Your microTALK
ready to receive transmissions. The radio is
always in Standby Mode except when the
Talk or Call buttons
Battery Low
When battery power is low, the Battery Low
icon will blink.
or recharged, if using rechargeable batteries.
Battery/Power Saver
Your microTALK
designed to extend battery life. If there are no
transmissions within ten (10) seconds, the radio
will automatically switch to Battery Save
This will not affect the radio's ability to receive
incoming transmissions.
Communicating with Another Person
To Talk To Another Person:
1. Press and hold the Talk
2. With the microphone about two (2) inches (5 cm)
from your mouth, speak in a normal voice.
3. Release the Talk
finished talking and listen for a response.
You cannot receive incoming calls while
pressing the Talk button.
Both radios must be tuned to
the same channel to communicate.
Mode Functions
Press and release the
scroll through the Mode functions. In Mode
Function, you can set Privacy Codes and
turn "Roger Beep" On or Off.
Power button until you
® radio is now in
are pressed.
Your batteries should be replaced
® radio has a unique circuit
button.
button when you
Mode/Lock button to
® Radio
•
Standby Mode,
•
•
Mode.
•
are
•