Call Screening; Behavior Of The Led Key On The Base Station - Philips SE1701B/51 User Manual

Remote access commands
Key Function
1 Repeat the current or listen to
the previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine
on.
(not available when you listen to
the messages).
8 Stop listening to the message.
9 Switch the answering machine
off.
(not available when you listen to
the messages).

Call screening

You can hear the caller while he is leaving a
message. Press to pick up the call.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Behavior of the LED key on
the base station
The table below shows you the current status
with different LED key behavior on the base
station.
Answering Message status
machine
status
Off -
On No new message On
On New message
On Message full
On Recording
incoming
message
On Registration
mode
LED key on the
base station
Off
Flashing
Flashing
quickly
Flashing
Flashing
EN
35