Econavi Operation; Prime Fresh - Panasonic ECONAVI NR-CY55CGKAU Operating Instructions Manual

ECONAVI Operation

Model : NR-CY55CGKAU
The refrigerator detects the opening and closing of the refrigerator door and the brightness
around the refrigerator to automatically control operation to ensure maximum energy saving.*
 ECONAVI operation
●The refrigerator learns the lifestyle patterns of
your family from door opening and time periods of
infrequent use to maximise energy effi ciency.
●The refrigerator learns your lifestyle patterns from the
previous 3 weeks of use and uses that data from the
4 week onwards.
th
Therefore the ECONAVI lamp "ON/OFF" pattern may
change from the 4
●The refrigerator performs the ECONAVI energy
saving operation when it becomes dark*
refrigerator such as overnight when you are asleep.
●The brightness of the ECONAVI lamp is lowered
approximately 5 minutes after it is lit.
 Settings for enabling ECONAVI operation
●ECONAVI operation is automatically enabled when the temperature control for both the
freezer compartment and fridge compartment is set to "Med".
●ECONAVI mode does not operate if the [Quick Freezing] mode is in operation.
●It is not possible to force to start of the ECONAVI mode.
Remark
1
* The effectiveness of the ECONAVI mode is dependant on the ambient temperature,
ambient brightness and the number of times the refrigerator door is opened and closed and
the state in which food is stored.
2
* Darkness is detected by the light intensity sensor at approximately 3 lx to 10 lx or less.
Model : NR-CY55CPSAU
This model also has ECONAVI mode, but it does not feature ECONAVI lamp and light
intensity sensor.

Prime Fresh +

 How to operate the "Prime Fresh +" mode
1 Model : NR-CY55CGKAU
Press the button "Prime Fresh" until the light LED "Prime Fresh +" turns on.
2 Model : NR-CY55CPSAU
Press the button "Select" until the light "Prime Fresh" turns on, then press button "Temp.
Control" until the light LED "Prime Fresh +" turns on.
Remark
●If you want to stop the operation immediately, please repeat step 1 or step 2 until the light
LED turns off.
●The system will stop the operation automatically when it runs for 105 mins (as ambient
temperature is below 18 °C) or 150 mins (as ambient temperature is above 18 °C) and
return to normal mode (the LED turns off)
●The LED fl ashing means that the defrosting system is now working. "Prime Fresh +" mode
will start right after the defrosting operation is fi nished.
ARAH1E200680_EN.indd 13 ARAH1E200680_EN.indd 13
week onwards.
th
2
ECONAVI lamp
Light intensity sensor
around the
Operation
1
13
8/30/19 2:39 PM 8/30/19 2:39 PM