Samsung RL22 Series User Manual page 17

2. Insert and tighten the 2 hex head bolts into the
left and right middle hinges with an allen
wrench.
3. Replace the middle hinge cap.
4. Place the hole in the bottom of the left d oor
over the middle hinge.
5. Position the top table in place. Insert and
tighten the 3 screws into the top table with a
philips screwdriver(+).
Top Table Top Table
6. Insert the left upper hinge shaft into the hole on
the corner of the fridge door.
7. Insert the upper hinges into the holes at the top
of the door.
Insert and tighten the 3 hex head bolts into the
left and right upper hinges with a socket
wrench.
8. Insert and tighten the ground screw into the left
and right upper hinges with a philips
screwdriver(+).
ground wire ground wire
9. Connect the electronic wire on the top of the
refrigerator.
setting up _17