Table of Contents
Advertisement
en Installation and connection
Note: Stellen Sie sicher, dass Sie das
Gerät an einen Wasserzulauf mit
einer Sicherheitseinrichtung gegen
Trinkwasserverunreinigung durch
Rückfließen (gem. DIN EN 1717) an-
schließen. Die hierfür vorgesehenen
Anschlussventile/Wasserhähne sind
bei ordnungsgemäßer Hausinstalla-
tion mit dieser Sicherheitseinrichtung
ausgestattet.
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
16
¾˝
min.
10 mm
min.
17 mm
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Drainage into a si-
phon
Drainage into a wash-
basin
Drainage into a plastic
pipe with rubber
sleeve or into a gully.
Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.
Fix and secure the wa-
ter outlet using an "el-
bow." → Page 33
Fix and secure the wa-
ter outlet using an "el-
bow." → Page 33
Advertisement
Table of Contents
