Panasonic PT-AE4000E Functional Instructions page 24

PICTURE menu
3. Adjusting the linear intensity.
1) Changing the selected point.
(Using the remote control)
To select another point, press the SUB MENU
button. Selected point will be moved each time the
SUB MENU button is pressed.
Ex. 5 6 ··· 9
Y ADJUST
0%
POINT 5
Y ADJUST
0%
POINT
6
(Using the control panel/remote control)
You can also change the POINT from the GAMMA
ADJUSTMENT menu directly. Press the RETURN
button to display the GAMMA ADJUSTMENT menu
if you are in the Y/R/G/B ADJUST menu.
Use ▲ ▼ to select POINT and ◄ ► to change the
point from 1 to 9.
Ex. Press ► to change the point from 5 to 6.
GAMMA ADJUSTMENT
GAMMA ADJUSTMENT
E
24 - NGLISH
1 ...
50% 100%
INPUT
OUTPUT
INPUT 50% +10
RESET
50% 100%
INPUT
INPUT OUTPUT
60% 0
RESET
ADJUSTMENT MODE ADVANCED
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT 5
Y ADJUST
R ADJUST
G ADJUST
ADJUSTMENT MODE ADVANCED
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT 6
Y ADJUST
R ADJUST
G ADJUST
2) Adjusting the INPUT level.
To adjust the INPUT level from the present setting,
press ◄ ► continuously until it reaches your
desired level.
It can move from left to right but cannot be set
beyond the adjacent points.
Only available to adjust the INPUT level in the
Y ADJUST menu and not other menus (R/G/B
ADJUST).
Ex. Press ◄ in the Y ADJUST menu and move
the selected point leftward.
Y ADJUST
0%
INPUT
POINT INPUT
5
Y ADJUST
0%
MOVE LEFT
INPUT
POINT 5 INPUT
50% 100%
50% OUTPUT 0
RESET
50% 100%
OUTPUT
44% 0
RESET