Table of Contents
Advertisement
3.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Network Settings
menu. Press MODE/ENTER.
4.
Highlight Remote Desktop and press MODE/
ENTER.
5.
Enter the Account and Password the same as step
1.
6.
Highlight Connect and press MODE/ENTER to
connect the selected PC.
7.
Connect USB keyboard or mouse to control the
host PC's desktop through the projector.
•
Remote Desktop Control does not support PC Standby mode.
•
Remote Desktop Control only supports LAN source so the projector source is fixed on
LAN.
Operation
65
Advertisement
Table of Contents
