Table of Contents
Advertisement
` PC Health Status
& Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. (Default)
Disabled
Clears the record of previous chassis intrusion status and the Case Open field will
Enabled
show "No" at next boot.
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/DRAM Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System Fan Speed
Displays current CPU/system fan speeds.
& CPU Temperature Warning
Sets the warning threshold for CPU temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)
& CPU Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Allows the fan to run at different speeds according to the CPU temperature. You
Normal
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Fan Speed Percentage item.
Manual
Full Speed
Allows the fan to run at full speeds.
& Fan Speed Percentage
Allows you to control the fan speed. This item is configurable only when CPU Fan Speed Control is set
to Manual. Options are: 0.75 PWM value /
& 1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Allows the fan to run at different speeds according to the system temperature. You
Normal
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Fan Speed Percentage item.
Manual
Full Speed
Allows the fan to run at full speeds.
& Fan Speed Percentage
Allows you to control the fan speed. This item is configurable only when 1st System Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
(Note)
This item is present only when you install a CPU and a memory module that support this feature.
C/140
F, 70
C/158
F, 80
o
o
o
o
C ~ 2.50 PWM value /
C.
o
o
C ~ 2.50 PWM value /
C.
o
o
- 23 -
C/176
F, 90
C/194
F.
o
o
o
o
Advertisement
Table of Contents
