Installing A Dc Power Module - D-Link DXS-3600 Series Hardware Installation Manual

DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide
Figure 2-5 Installing an AC Power Supply Module
Figure 2-6 Installed AC Power Supply Module
In addition, an optional second AC power supply module can be plugged into the second power supply module slot
displayed above. When the primary AC power connection fails, the secondary AC power connection will take over all
the power immediately and automatically.
The AC power supply modules are hot-swappable, meaning, that they can be inserted and removed while the switch
is powered on. This feature enhances the reliability of this switch.

Installing a DC Power Module

This switch supports a unique dual power input feature. Connect the one end of the DC power cord supplied to a DC
power source (-48VDC/5.2A), that will be activated when the AC power is not working. Please make sure that
connection polarity (positive and negative) is correct before using this feature to avoid any damaged. Connect the
power source to the DC plug before plugging it into the switch. This will protect the switch from a possible shortage on
the DC cable.
Figure 2-7 Installing a DC Power Supply Module
17