Table of Contents
Advertisement
5. Individual settings
Do not jam items of washing between the door and rubber seal.
²
Close the washing machine door.
You can use the displayed presettings or adjust the selected
programme optimally to the items of washing by changing the
presettings or selecting additional options.
Options are retained when the appliance is switched off and can
²
be selected, deselected or changed depending on the progress
of the programme.
Changing presettings
Ø
Ø
Ø
The respective programme duration is displayed by selecting
²
the programme. The programme duration is automatically
adjusted while the programme is running if the programme
duration requires changing, e.g. due to changes in the settings of
the options.
16
°
C (Temperature):
Temp.
Before and during the programme the displayed washing
temperature can be changed. The maximum selectable
washing temperature varies depending on the selected
programme.
rpm
(Spin):
0
To change the indicated spin speed or select - - - - (rinse stop
= without final spin cycle, washing remains in the water after
the last rinse cycle). Maximum spin speed depends on the
programme and model.
Ready in:
Delays the Finished in time (end of programme).
Before the programme starts, the end of the programme can
be preselected in h steps up to maximum 24 h.
When the programme has started, the preselected time is
displayed e.g. for
programme starts. Then the programme duration is
displayed, e.g.
:
ƒ
When the programme has started, the preselected time
can be changed as follows:
1. Select
Start/Reload.
A
2. Select the Ready in button and change the Ready in time.
3. Select
A
Start/Reload.
:
h and counts down until the wash
‰
‹‹
h.
„‹
Advertisement
Table of Contents
