Basic Commands (Function Level 1); Arm; Aux/Trunk - Clifford 5906X Owner's Manual

Basic commands (function level 1)

Arm

Press and release
The alarm arms, doors lock (if connected), and the siren chirps and
lights flash once. The
Valet mode* is On the doors lock and the
tion and tone play. Exit Valet mode to arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the lights. The
tones play to confirm. Press the
put.

AUX/Trunk

Press and hold
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The
TRUNK RELEASE
* See "Remote and System Operations" on page 45 for details.
** See "Alarm Features" on page 35 for details.
12
animation and beeps play to confirm. If
ARMED
AUX
animation and tones play to confirm.
LOCKED (IN VALET)
animation and siren
PANIC
or button to stop the out-
© 2016 Directed. All rights reserved.
anima-