Clock Setup - LG LV661 Series Installation Manual

34
INSTALLATION MENU
StandBy
- Set the sending and receiving scenario of OpStandBy(0x0c) command.
- Ths detailed scenario is described on the table below.
Send Only
Receive Only
All
Off
Forced Initialize
- This setting will be enabled When CEC mode is set as 'TVLink-CEC'
- If 'Enable" is selected, TV will change its input source to HDMI1 by any HDMI-CEC simulation from a device.
HTNG Hotel Mode
- If you use following functions via TVLink-HCEC, HTNG Hotel mode will be set as "Yes" automatically. (*Power On Default,
Start Volume, Maximum Volume, Minimum Volume, or Start Volume)
- Even if 'Hotel Mode Operation' is set as No, above settings are still effective.

Clock Setup

Clock Display
(Depending on model)
- You can select 'Enable' or 'Disable' by pressing
- After selecting 'Enable' , you can see the LED Clock TV.
Dimming Standby
(Depending on model)
- Standby Dimming value Range : 1~2
Dimming PowerOn
(Depending on model)
- PowerOn Dimming value Range: 1~5
Clock Source
- You can select 'Off' , 'Pro:Centric' , 'TV' , 'NTP' , 'Admin' by pressing
- NTP : Clock is synchronized using Network Time Protocol. It's only enabled when network cable is connected.
- Admin : It's automatically set to Admin when clock is updated by commercial protocols like TVLink-HCEC, TVLink-
Interactive, or HCAP API.
- Off : Clock is synchronized using any available clock source.
- Pro:Centric : Clock is synchronized using Pro:Centric server. (Depending on model)
- TV : Clock is synchronized using particular TV program.
Send Receive
O X
X O
O O
X X
button.
button.