Sony VPL-VW870ES Operating Instructions Manual page 8

To adjust the horizontal position
Press </,.
The picture projected on the screen moves right or left by
a maximum of 31% of the screen width from the center of
the lens.
Top view
31% 1 screen width
: Picture position when moving the
picture to the left at maximum
: Picture position when moving the
picture to the right at maximum
Press the RESET button on the remote control while the Lens Shift
adjustment window is displayed, the horizontal position returns to
the center of the lens (factory default position). The zoom and focus
are not changed.
To adjust the vertical position
Press M/m.
The picture projected on the screen moves up by a
maximum of 85% or moves down by a maximum of 80%
of the screen height from the center of the lens.
Side view
85%
1 screen
height
80%
: Picture position when moving the
picture upward at maximum
: Picture position when moving the
picture downward at maximum
31%
8
Note
The range to move the picture projected on the screen can be
adjusted only within the octagon area illustrated below. For details,
see "Projection Distance and Lens Shift Range" (page 47).
Range of movement of the projected picture
0.85V
0.31H
Projected Picture
0.8V
H: Width of the projected picture
V: Height of the projected picture
To adjust the tilt of the installation surface
If the unit is installed on an uneven surface, use the front
feet (adjustable) to keep the unit level.
Front feet (adjustable)
Notes
• If the unit is tilted up or down, the projected image may be
trapezoidal.
• Be careful not to catch your finger when turning the front feet
(adjustable).
0.31H
Turn to adjust.