Brother VM5200 Operation Manual page 27

No. Display
o Mirror image key
p Automatic thread
cutting key
q Automatic
reverse/reinforcement
stitch key
r Free motion mode
key
s Pivot key
For additional operational information, refer to page reference number listed above.
Key Name
Press this key to create a mirror image of the selected stitch pattern. If the key
display is light gray, a mirror image of the selected stitch pattern cannot be
sewn.
Press this key to set the automatic thread cutting function. Set the automatic
thread cutting function before sewing to have the machine automatically sew
reinforcement stitches at the beginning and end of sewing (depending on the
pattern, the machine may sew reverse stitches) and trim the threads after
sewing.
Press this key to use the automatic reverse/reinforcement stitching setting.
If you select this setting before sewing, the machine will automatically sew
reverse stitches or reinforcement stitches depending on the pattern, at the
beginning and end of sewing.
Press this key to enter free motion sewing mode.
The presser foot is raised to an appropriate height and the feed dog is lowered
for free motion quilting.
Press this key to select the pivot setting. When the pivot setting is selected,
stopping the machine lowers the needle and slightly raises the presser foot
automatically. In addition, when sewing is restarted, the presser foot is
automatically lowered.
• If this key appears as
• Be sure the needle position on page B-27 of Machine Settings is set to the
down position.
Explanation
, the pivot function cannot be used.
Basic operations B-25
LCD SCREEN
Page
S-21
B
1
S-14
S-5
S-40
S-15