Table of Contents
Advertisement
USER GUIDE
Control Operation-Service
UI BUTTON LAYOUT
1.
Up Button
-Increases temperature
-Navigates through service menu
-LED activated with button activation
Down Button
2.
-Decreases temperature
-Navigates through service menu
-LED activated with button activation
USER GUIDE
USER GUIDE
3.
Light Button
-Activates light for 3 hours on select models
-Used to select items in service menu
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
-LED activated with button activation
CONTROL FUNCTION GUIDE
CONTROL FUNCTION QUICK GUIDE
CONTROL FUNCTION QUICK GUIDE
FUNCTION
FUNCTION
ON/OFF
ON/OFF
Toggle lights
Toggle lights
Adjust refrigerator
Adjust refrigerator
temperature
temperature
View temperature in unit
View temperature in unit
Toggle between F/C
Toggle between F/C
DOOR ALERT NOTIFICATION
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
When the door is left open for more than 5 minutes:
•
An audible tone will sound for several seconds every
•
An audible tone will sound for several seconds every
minute.
minute.
•
"dr" will appear in display.
•
"dr" will appear in display.
Close door to silence alert and reset.
Close door to silence alert and reset.
VIEWING ACTUAL TEMPERATURE
VIEWING ACTUAL TEMPERATURE
In viewing temperature in these modes any offsets are
In viewing temperature in these modes any offsets are
taken into account. This means that if you place a therm-
taken into account. This means that if you place a therm-
istor in a known temperature, let's say ice water, it may
istor in a known temperature, let's say ice water, it may
not read the 32°F that you would assume. If the control
Control Operation-Service
not read the 32°F that you would assume. If the control
offset was preset at -3°F while you placed the thermistor
offset was preset at -3°F while you placed the thermistor
in an icebath, the actual thermistor reading when viewing
COMMAND
COMMAND
Press
and release
Press
and release
Press
and release to leave interior light
Press
and release to leave interior light
on for 3 hours
on for 3 hours
Push
and release
or
Push
or
and release
Push
and release the together
and
Push
and release the together
and
Hold the
and
for five seconds
Hold the
and
for five seconds
USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING
CONTROL FUNCTION QUICK GUIDE
FUNCTION
ON/OFF
Toggle lights
Adjust refrigerator
temperature
View temperature in unit
Toggle between F/C
DOOR ALERT NOTIFICATION
DISPLAY/OPTIONS
DISPLAY/OPTIONS
When the door is left open for more than 5 minutes:
Unit will immediately turn ON or OFF
Unit will immediately turn ON or OFF
Glass door wine captains and beverage centers
Glass door wine captains and beverage centers
•
An audible tone will sound for several seconds every
only.
only.
minute.
When the "F" or "C" in the display is flashing,
When the "F" or "C" in the display is flashing,
•
"dr" will appear in display.
push
or
to adjust the set point
push
or
to adjust the set point
temperature.
temperature.
Close door to silence alert and reset.
The display will flash and then toggle from set
The display will flash and then toggle from set
VIEWING ACTUAL TEMPERATURE
point to temperature in unit.
point to temperature in unit.
In viewing temperature in these modes any offsets are
The display will change units.
The display will change units.
taken into account. This means that if you place a therm-
When the degree symbol is flashing the unit will allow the
istor in a known temperature, let's say ice water, it may
When the degree symbol is flashing the unit will allow the
use of the control for demonstrations. The unit can be left
not read the 32°F that you would assume. If the control
use of the control for demonstrations. The unit can be left
in this mode indefinitely.
offset was preset at -3°F while you placed the thermistor
in this mode indefinitely.
in an icebath, the actual thermistor reading when viewing
actual temperature would read 35°F. In the unit this would
SERVICE MODE
SERVICE MODE
cause the cabinet to push itself 3° cooler. To view pure
This mode has options available for service diagnostics.
This mode has options available for service diagnostics.
thermistor readings you must go into the service menu
To enter the mode hold the hidden key for 10 seconds.
To enter the mode hold the hidden key for 10 seconds.
and choose the correct option.
The display will show "0." When in this mode use the up
The display will show "0." When in this mode use the up
and down arrows to select the desired option. The LIGHT
and down arrows to select the desired option. The LIGHT
To view the thermistor temperature, push and release the
key is the ENTER key and will initiate the function. If
key is the ENTER key and will initiate the function. If
up and down keys. The display will show the corrected
changing a setting, you must press the LIGHT key again
changing a setting, you must press the LIGHT key again
refrigerator temperature.
to retain the changed setting. To exit the service mode
to retain the changed setting. To exit the service mode
scroll to option "0" and press the LIGHT key. After five
scroll to option "0" and press the LIGHT key. After five
36
minutes of not touching any keys the mode will also exit
SHOWROOM MODE
minutes of not touching any keys the mode will also exit
automatically.
u-line.com
COMMAND
Press
and release
Press
and release to leave interior
on for 3 hours
Push
or
and release
u-line.com
u-line.com
Push
and
and release the togeth
Hold the
and
for five seconds
W
u
in
S
T
T
T
a
k
c
to
s
m
a
Advertisement
Table of Contents
Troubleshooting
