Kenwood NX-5300E2 User Manual page 34

RX Auto Gain Control
o
Allows you to set the transceiver to automatically adjust the volume of the receiving
sound to a specific level for easy listening.
Save GPS Data <GPS_S>
o
Allows you to save the current date, time and location information on the microSD
card.
Save Log Data <Log>
o
Allows you to save the operation and communication logs of this transceiver.
Scan <Scan>
o
Refer to "SCAN" {p. 38} .
Scan Delete/ Add <D/A>
o
Allows you to include or omit each channel in the scan sequence.
Scan Normal <ScnNrm>
o
Allows you to forcibly perform a non-priority scan even when priority scan has been
set.
Scan Program <ScnPrg>
o
Allows you to reprogram the Scan List and Priority channels using your transceiver.
Refer to "SCAN PROGRAMMING" {p. 39} .
Scrambler/ Encryption <Scr/ Encryp>
o
Allows you to prevent a third party from listening in on your call. Refer to
"SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (P25/ NXDN/ DMR)" {p. 45} .
Scrambler/ Encryption Code
o
Allows you to change the scrambler code used in the transmission. Refer to
"SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (P25/ NXDN/ DMR)" {p. 45} .
Send the GPS Data <GPS_TX>
o
Allows you to send your positioning data to the base station when a GPS unit has
been installed.
Short Message <SDM>
o
Allows you to send short messages such as an address, telephone number, etc.
Site Down <Site->
o
Press this key to decrease the site number.
Site Lock <SiteLk>
o
Allows you to lock the current site. The transceiver will not be able to search for
alternate sites, and "Site Lock" appears on the display.
Site Number
o
This displays the site number.
34