Kenwood NX-5300E2 User Manual page 29

Hide thumbs Also See for NX-5300E2:
Table of Contents

Advertisement

CW Message <CW_Msg>
o
Press this key to send the CW message.
Dialing <Dial>
o
Activates Dialing mode and allows you to enter a dialing code directly to make a call.
Digit 10x Down <10x->
o
Press this key to decrease the Selcall number by 10 with each press.
Digit 10x Up <10x+>
o
Press this key to increase the Selcall number by 10 with each press.
Digit 1x Down <1x->
o
Press this key to decrease the Selcall number by 1 with each press.
Digit 1x Up <1x+>
o
Press this key to increase the Selcall number by 1 with each press.
Direct Channel 1 ~ 5 <DR1 ~ DR5>
o
Press one of these keys to jump to a frequently used zone and channel (pre-
programmed by your dealer). If activated by your dealer, you can set your own Direct
Channels by selecting your desired zone and channel using Direct Channel 1 ~ 5
Select.
Direct Channel 1 ~ 5 Select
o
Allows you to set the currently selected zone and channel as the Direct Channel 1 ~
5.
Display Format <Disp>
o
Allows you to switch the display between the zone-channel number and the channel
name.
Eject SD Card <Eject>
o
Allows you to eject the microSD card.
Emergency
o
Refer to "EMERGENCY CALLS" {p. 44} .
External Mic Sense
o
Activates External Mic Sense mode.
External Speaker <Spkr>
o
Switches the speaker from the transceiver's built-in speaker to an optional external
speaker.
Fixed Volume <FixVol>
o
Allows you to change the volume level of the tone.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-5200eNx-5000 seriesNx-5300eNx-5200e2

Table of Contents