Troubleshooting - Panasonic HX-WA3 Operating Instructions Manual

Others

Troubleshooting

∫ It is not a malfunction in following cases
Object seems to be
warped.
White round spots
like soap bubbles
appear on the
recorded picture.
Why does the
displayed image
contain some red,
blue and green
dots, or why are
black spots visible.
The lens or LCD
monitor fog up.
≥ Object seems to be warped slightly when the
object moves across the image very fast, but
this is because the unit is using MOS for the
image sensor. This is not a malfunction.
≥ If you take a
picture with the
flash in a dark
place or indoors,
white round spots
may appear on
the picture caused by the flash reflecting of
particles of dust in the air. This is not a
malfunction. A characteristic of this is that the
number of round spots and their position
differ in every picture.
≥ Condition due to the LCD monitor
characteristics. Not a malfunction. Spots only
appear in the LCD monitor and will not be
recorded with the images.
≥ This is due to condensation. This is not a
malfunction. Please refer to page 11.
- 215 -