Table of Contents
Advertisement
Convenient functions
Changing the unit's settings
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
• To set the IP address and DNS
1 Set "IP Address Auto-assignment" and
"DNS-IP Auto-assignment" to "Off".
2 Select the item, then press [OK] to show
the respective setting.
• When the router's DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the "IP
Address" and assign the same number for
"Subnet Mask" and "Gateway Address".
Proxy Server Settings
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
Network Service Settings
Lock
You can restrict using VIERA Connect.
• PIN is required to change. (
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using VIERA
Connect.
• Depending on contents, this function will
not work.
• Select "Off" when the audio is warped.
88
VQT4W67
Remote Recording Function Settings
You must register to a service to use this
function.
For details please check the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
• However, as of February 2013, the service
has not yet been launched.
Remote Recording function
When you set a recording from a mobile
phone or a PC, etc. away from home, set
this function to "On".
Device ID
This is the device ID and device password
required for registering to and using a
service.
Initialize Device Password
The device password for this unit is
initialized.
• When you initialize the device password,
you will not be able to use Remote
Recording function. To use the Remote
23)
Recording function again, you must
re-register to the service.
Advertisement
Table of Contents
