Table of Contents
Advertisement
Main unit
Pull to flip down the front panel.
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Open/close disc tray
Disc
USB memory, etc.
3 Blue LED
• It is possible to set the LED to turn on/off.
(
85, Blue LED)
4 Disc tray
5 USB port
6 SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
SD card
Display
7 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
8 CALL LED
• The LED will light up when this unit receives
incoming call etc. of the video
communication. (
9 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
: Channel select (
23)
; Start recording (
27)
< Stop
= Start play
Display
HDDSD
BD
4 5
6
1 SD card slot indicator
2 Copying indicator
3 Disc indicator
4 Drive (HDD, BD or SD) indicator
5 Remote control signal indicator
6 Main display section indicator
- Current time
- Playback counter
- Various messages (
7 Playback indicator
8 USB port indicator
9 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
Getting started
68)
1
2
3
COPY
SD USB
PLAY
7 8
9
104)
13
VQT4W67
Advertisement
Table of Contents
