Table of Contents
Advertisement
Network settings
Network Connection
Ensure the connections are completed before starting network setup.
Network > Network connections
■
Quick setup - Wireless
1. Display the menu with MENU.
2. Select
Network
>
access.
Confirm the encryption key, settings and position of your access point
●
before starting setup. For details, read the manual of the access point.
3. Select
Quick setup
When the LAN cable is connected, wired setup will be done
●
automatically.
4. Select your desired access point with
Available Wireless Networks are displayed automatically.
●
: Encrypted access point
For WPS(Push button)
●
1) Select
Easy setup with Push button
access.
2) Press the WPS button on the access point until the light flashes.
3) Connect the TV with the access point with OK.
– WPS: Wi-Fi Protected Setup™
– If the connection has failed, check the settings and positions of your
access point. And then, follow the on-screen instructions.
It is recommended to select the encrypted access point.
●
5. Enter the encryption key of the access point with
OK
to set.
You can set characters using
●
Press
BACK/RETURN
●
6. Automatically setup is done and
Network > Network settings > Network Status
Network Connection
with
/
and press
Numeric
to store.
Network Status
- 148 -
with
/
and press
OK
to access.
/
and press
OK
with
/
and press
/
/
buttons.
is displayed.
OK
to
to access.
OK
to
/
and press
Advertisement
Table of Contents
