Superior Fireplaces DRT3535DEN Installation And Operation Instruction Manual page 56

Innovative Hearth Products
DRT/DRC3500 Series Direct-Vent Gas Fireplaces
Installing the DRT3500 Series 40" and 45" logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 35 - 40" and 45" Log Sets
1. If necessary, remove the glass door (Page 57-58). Locate and bend up the log placement brackets (Figure 49).
Figure 48 - Locating the log placement brackets
2. Position rear left log (1) on the left rear log bracket (Figures 49 and 50)
3. Position the center log (2a) against the log grate and to the rear of the fireplace (Figure 51).
Figure 50 - Placing log 2b
4. Position the center log attachment (2b) at the right end of the center log (2a) (Figure 51).
5. Position the right front log (3) on the center log attachment (2b) and the left front log (4) over the center log (2a)
56
1 2a
4
Left and Right Rear Log Bracket
Left Front Bracket
2a
(Figure 51).
Log Number
3
Catalog number for the entire set:
F2195 for 40" Series
F2197 for 45" Series
2b
Figure 49 - Placing logs 1 and 2a
Right Front Bracket
Figure 51 - Placing log 5
2b
1
2a
2b Center Log Attachment
3
4
1
2a
4
Operation
900298-00, 02/2018
Description
Rear Left Log
Center Log
Right Front Log
Left Front Log
3