Table of Contents
Advertisement
Switching the Beeper Off
You can switch the beeper off whenever you want.
1. Press the Start(
(about one second).
Result:
The oven does not beep to indicate the end of a
function.
2. To switch the beeper back on, press the Start(
Clock(
) buttons again at the same time (about one
second).
Result:
The oven operates normally.
Using the Memory Cook Feature
If you often cook or reheat the same types of dishes, you can store the
cooking times and power levels in the oven's memory, so that you do
not have to reset them each other.
Storing the Settings
1. To programme the...
Setting
Resetting
2. Set your cooking programme as usual (MW, Grill,
MW+Grill, Convection, MW+Convection)
3. Press the Start(
Result:
Your settings are now stored in the oven's
memory.
Using the Settings
First, place the food in the centre of the turntable
1. Press MEMORY(
2. Press the Start(
Result:
The food is cooked as requested.
) and Clock(
) buttons at the same time
) and
Then press MEMORY(
button.
Once (Display is P)
Twice (Display is P)
) button.
) button.
) button.
Manual Stop Turntable Function
The turntable on/off(
fill the whole oven by stopping the turntable from rotating (only
manual cooking mode).
The results will be less satisfactory in this case as the cooking is less
even. We recommend that you turn the dish by hand halfway through the
cooking process.
Warning !
Never operate the turntable without food in the oven.
Reason:
This may cause fire or damage to the unit.
1. Press the Turntable on/off (
Result:
2. To switch the turntable rotating back on, press the Turntable
on/off (
Result:
u
Do not press the Turntable on/off(
)
process. Cancel the cooking phase, before pressing the turntable
On/Off(
) button.
23
) button enables you to use large dishes which
) button.
The turntable will not rotate.
) button again.
The turntable will rotate.
) button during the cooking
EN
Advertisement
Table of Contents
