Adjustments For Computer Screen Display - Sharp PN-70HC1E Operation Manual

Adjustments for computer screen display

nAutomatic adjustment
When you use the VGA(D-SUB) to display a computer screen
for the first time, or when you change the setting of the
computer, use the automatic screen adjustment.
1. Switch the input to VGA1 or VGA2 and display the
adjustment pattern. (See the description below.)
2. Swipe from the edge (left or right) of the screen to
display the menu, and touch
adjustment".
3. Touch "Auto adjust".
The automatic adjustment is complete in several seconds.
4. Press the RETURN button to close the menu screen.
TIPS
• If the screen cannot be adjusted properly with one
automatic adjustment, repeat the automatic adjustment two
or three times. Try manual adjustment if necessary.
nScreen display for adjustment
Before making adjustments in the Image menu, display
an image to brighten the entire screen. If you are using
a Windows computer, use the adjustment pattern on the
supplied CD-ROM.
Opening the adjustment pattern
The following example is performed in Windows 10.
1. Load the supplied CD-ROM into the computer's CD-
ROM drive.
2. Open [CD Drive] in [This PC].
3. Double-click [Adj_uty.exe] in the [Monitor] folder.
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4. When adjustment is finished, press the [Esc] on the
computer's keyboard to quit the adjustment program.
5. Eject the CD-ROM from the CD-ROM drive.
TIPS
• If the display mode on the computer you are using is 65000
colors, the color levels in the color pattern may appear
differently or grayscale may appear to be colored. (This
is due to the specifications of the input signal and is not a
malfunction.)
- - "PC image
Menu Items
35
E