Sharp PN-70HC1E Operation Manual page 34

Menu Items
nSystem setting
The main menu items not found in the setting menu (see page 33) are explained in this section.
Ethernet
Set whether or not to use LAN terminal. Set the IP address, subnet mask, and other settings.
Automatic acquisition of IP
If your LAN has a DHCP server and you wish to obtain an address automatically, select Automatic acquisition of IP.
Static IP
You can configure the following settings.
IP Address, Gateway, Subnet Mask, DNS 1, DNS 2
Proxy
Configure settings to use a proxy server.
Screen Lock Setting
You can lock the monitor with a password when the power is turned on.
Off If No Signal
This setting determines whether or not to set the monitor to go into standby mode if there is no signal or no operation is
performed for 15 minutes.
Wallpaper
You can select wallpaper.
34
E