Husqvarna LC 118 Operator's Manual page 7

2. Lift the upper handle until it aligns with the lower
handle. Tighten the knobs.
CAUTION: Be careful and do not cause
damage to the cables when you lift the
upper handle.
To assemble the grass catcher
1. Put the top part of the grass catcher onto the lower
part of the grass catcher.
2. Lift the rear cover.
3. Hold the grass catcher at the grass discharge
channel.
1434 - 001 -
4. Lower the rear cover to lock the grass catcher into
position.
To assemble the mulch plug
1. Lift up the rear cover and remove the grass catcher.
2. Put the mulch plug (A) into the discharge channel.
3. Close the rear cover.
To assemble the spark arrester
(Optional accessory)
1. For LC 118, remove the engine cover.
2. Remove the screws that holds the muffler cover.
3. Remove the muffler cover.
4. Insert the spark arrester.
Note: Make sure to align the holes in the spark
arrester and the muffler.
5. Attach the supplied screw
6. Attach the muffler cover and install the screws.
7. For LC 118, attach the engine cover.
A
7