Saeco RI9828/11 Operation And Maintenance Manual page 8

stARtInG tHe MAcHIne
Make sure the power button is not pressed and the machine is turned off. Check the machine features on the label
on the bottom of the appliance.
1
Remove the coffee bean hopper lid.
Fill the hopper with coffee beans.
4
Fill the tank with fresh drinking
water. Do not exceed the "max"
level indicated on the water tank.
Once fi lled, place the tank back into
the machine.
7
Press the main power button to the
"ON" position.
2
Close the lid pushing it down
completely.
5
Insert the plug into the socket
located on the back of the machine
and insert the other end into a
power outlet with suitable current.
When the correct temperature is reached, the machine performs a priming of
the water circuit and a rinse cycle of the internal circuits. A small quantity of
water is dispensed. Wait for this cycle to be completed automatically.
(See page 23 to enable/disable the rinse function.)
InstALLAtIon
3
Remove the water tank.
Install the water fi lter as
recommended on page 8.
6
Place a container beneath the hot
hot water / steam wand.
5