Saeco RI9828/11 Operation And Maintenance Manual page 31

MAIntenAnce
28
BoILeR DescALInG cYcLe
In case of confl ict, priority must be given to what is indicated in the operation and maintenance manual
over the instructions provided on separately sold accessories and materials.
To carry out an automatic descaling cycle. Descaling should be performed every 1-2 months, when water comes
out more slowly than usual or when the machine displays the relevant message. The machine must be on and
controls the distribution of the descaling solution automatically.
Warning! never drink the descaling solution or any products dispensed until the cycle has been
carried out to the end. never use vinegar as a descaling solution.
When descaling is performed, someone must be present during the entire process (approx. 40 mi-
nutes).
Use the Saeco descaling solution only, specially designed to comply with the technical
specifi cations of the machine, to ensure the machine performance will not decrease over
time, and to guarantee a safe and risk-free use. The descaling solution must be disposed of
according to the manufacturer's instructions and/or applicable regulations in the country of
use.
note. Before starting a descaling cycle make sure that:
1. a large enough container is positioned under the water wand;
2. tHe "IntenZA" WAteR FILteR HAs Been ReMoVeD.
boiler
descaling
cycle
Press "boiler descaling cycle"
1
1.4.3. boiler descaling cycle
no
yes
Do you wish to perform the
descaling cycle?
Press "yes" to start.
Descaling is performed at a controlled temperature. If the machine is cold,
you must wait until it has reached the correct temperature; otherwise you
must cool the boiler as follows:
2
Place a large container beneath the
hot water / steam wand.
3
Turn the knob to the
position.