Table of Contents
Advertisement
operating can be well below the maximum value. Because the device
is designed to operate at multiple power levels to use only the power
required to reach the network, in general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a device model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model.
The highest SAR value for this device when worn on the body, as
described in this user guide, is 0.81 W/kg. (body-worn measurements
differ among device models, depending upon available accessories and
FCC requirements). While there may be differences between SAR levels
of various devices and at various positions, they all meet the government
requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model device
with all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model device is on file with
the FCC and can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID ZNFV930. Additional
information on Specific Absorption Rates (SAR) can be found on the
Cellular Telecommunications Industry Association (CTIA) website at
http://www.ctia.org/.
* In the United States and Canada, the SAR limit for mobile device
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements.
For Your Safety
102
Advertisement
Table of Contents
