Maytag SD-2 User Manual page 4

Controls at a Glance
Step 1
Select Temperature
To select the correct temperature, turn the temperature
control to one of four choices; Regular, Medium, Low
or Air Fluff.
DRYER TEMPS
For sturdy cottons or those labeled "Tumble Dry."
Regular
For permanent press, synthetics, lightweight cottons or items labeled "Tumble Dry
Medium
Medium."
Low
For heat sensitive items labeled "Tumble Dry Low" or "Tumble Dry Warm."
Air Fluff
Tumbles without heat. Used for sensitive loads or items needing freshening.
Step 2
Select Signal
End of Cycle Signal
Shortly before the cycle is complete, an audible signal
will sound. During the cool down portion of the
Permanent Press cycle, the audible signal will sound
intermittently.
Step 3
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an IntelliDry cycle, the control dial
should point between "More Dry" and "Less Dry" for
most loads.
Loads of larger or bulkier size may require the "More
Dry" setting to completely dry the load. The "Less
Dry" setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Regular IntelliDry
The Regular IntelliDry cycle is designed to dry loads
such as towels, underwear, t-shirts, jeans, etc.
3
LOAD TYPE