Advertisement
5 Comb your hair and divide your hair into small sections that are not
wider than 5cm.
6 Move the support backwards.
Create large curls, triangular curls, or large ringlets
1 Press the lever ( ) to open the clip ( ) and place a section of hair
between the clip and barrel ( ).
2 Release the lever and slide the barrel to the hair tip.
3 Hold the cool tip ( ) and the handle, and then wind the section of
hair round the barrel from end to root.
•
If you use the attachment with the spiral, wind the section of hair
round the barrel following the spiral profile.
4 Hold the barrel in the position for max. 15 seconds, and then unwind
the section of hair until you can open the clip again with the lever or
until you can remove the spiral from your hair.
5 To style the rest of your hair, repeat steps 1 to 4.
Create crimps
1 Press the lever ( ) to open the attachment and place a section of
hair between the crimping plates. Start crimping at the roots.
2 Release the lever and keep the plates together for 5 to 10 seconds.
3 Press the lever to open the attachment and place a lower area of the
same section of hair between the plates. Make sure there is an overlap.
4 Repeat this process until you have reached the hair tip.
5 To style the rest of your hair, repeat steps 1 to 4.
Create straight sleek style and flicks
1 Press the lever ( ) to open the attachment and place a section of
hair between the straightening plates.
2 Slide the styler down the length of the hair in a single motion (max. 5
seconds) from root to end, without stopping to prevent overheating.
•
To create the desired type of flick, turn the styler half-circle inwards
(or outwards) when reach the last 3-5 cm of the hair tip. Hold the
styler in that position for 2 to 3 seconds, and then release it.
3 After 20 seconds, repeat step 2 until you achieve the desired look.
4 To style the rest of your hair, repeat steps 1 to 3.
Advertisement
