Using the Magic Remote Control
•
Shake the Magic Remote slightly to the right and
left or press
,
pointer appear on the screen.
•
If the pointer has not been used for a certain period
of time or Magic Remote is placed on a flat surface,
then the pointer will disappear.
•
If the pointer is not responding smoothly, you can
reset the pointer by moving it to the edge of the
screen.
•
The Magic Remote depletes batteries faster than a
normal remote due to the additional features.
• Use the remote control within the specified range (within 10 m [32.8 feet]).
You may experience communication failures when using the device outside
the coverage area or if there are obstacles within the coverage area.
• You may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4 GHz) as the Magic Remote. This may cause
communication failures.
• The Magic Remote may not work properly if a wireless router (AP) is within
1 m (3.2 feet) of the projector. Your wireless router should be more than 1
m (3.2 feet) away from the projector.
• Do not disassemble or heat the batteries.
• Do not drop the battery. Avoid extreme shocks to the battery.
• Inserting a battery in the wrong way may result in explosion.
(INPUT) buttons to make the
45