Mb Intelligent Bios Iii) Menu - ECS A68F2P-M2 User Manual

M.I.B. III (MB Intelligent BIOS III) Menu
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have
installed in your system.
Main
CPU OverRatio Configuration
CPU Ratio/Voltage
Memory Clock
Memory Clock is:
Memory Profile1:
Memory Profile2:
Memory Profile3:
Memory Timing Configuration
Load Memory Profile
Command Rate
CAS# Latency (tCL)
RAS# to CAS# Delay (tRCD)
Row Precharge Time (tRP)
RAS# Active Time (tRAS)
Read CAS# Precharge (tRTP)
Row Cycle Time (tRC)
Write Recovery Time (tWR)
Active to Active Delay (tRRD)
Write to Read Delay (tWTR)
Four Active Window Delay (tFAW)
Row Refresh Cycle Time 0 (tRFC0)
Row Refresh Cycle Time 1 (tRFC1)
Row Refresh Cycle Time 2 (tRFC2)
Row Refresh Cycle Time 3 (tRFC3)
SB Spread Spectrum
CPU Ratio/Voltage (Auto)
This item is used to set CPU Ratio/Voltage.
Memory Clock (Auto)
This item is used to set Memory clock.
Memory Clock is (DDR-1600/800Mhz)
This item is used to set Memory clock.
Memory Profile1/2/3 (None)
This item is show Memory parameter and only the Memory supports X.M.P or A.M.P
the parameter will appear.
Memory Timing Configuration (Auto)
This item shows the information of Memory Timing.
Load Memory Profile (Disabled)
This item is used to select memory profile type.
Command Rate (1T)
This item shows the information of Command Rate.
CAS# Latency (tCL) (11)
This item determines the operation of DDR SDRAM memory CAS (column address
strobe). It is recommanded that you leave this item at the default value. The 2Tsetting
requires faster memory that specifically supports this mode.
42
Advanced Chipset
A68F2P-M2 USER MANUAL
M.I.B III Boot
Auto
Auto
(DDR3-1600/800Mhz)
None
None
None
Auto
Disabled
IT
11
11
12
28
6
39
12
5
6
24
4
4
4
4
Eneblaed
Security Exit
 : Select Screen

/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit